DONGGUAN XINGDONG ELECTRONICS CO., LTD.
Add: NO.2, Dagao Hengfeng 2nd Road, Changping Town, Dongguan, Guangdong, China
Tel:+86-769-83660708
Fax:+86-769-83660718
Email:info@d-fan.com.cn
URL:http://www.021gcb.com/eng/
Regardless of when using any "Micro Cooling Fan" has some of its prohibitions, wet curtain cooling fan is no exception, if you want to make the life of their wet curtain cooling fan products more long-term, it certainly maintenance, precautions work is indispensable today to talk about Wei wins on this knowledge, interested friends, let us look at it! When we use a wet curtain cooling fan before, first we need to check whether there is dust in the pool and some other debris should be cleaned annually using the period 1-2 times, the water should be added to the pool water or other clean water.
1. "Micro Cooling Fan" is wet curtain cooling fan's heart, if a fault occurs immediately cut off the power supply, timely electrician repair. Note that when you install a good ground connection, be careful when handling the impeller, so as not to collide with the box blade deformation.
2 wet curtain cooling fan control float valve malfunction if found dripping water or overflow pool, should be adjusted or replaced.
3. found inadequate or uneven wet curtain of water, to check whether the pool water, the pump if the water pipes and pumps running and especially the water inlet piping hole is blocked, and check water pipes Road is located in the middle of the wet curtain. Normal water height should be greater than 80mm.
4 Because of "Micro Cooling Fan" is a low-pressure type of fan (static, dynamic pressure are small) and therefore can not use an extension outlet pipe in the air cooler approach to long-range blast.
5 wet curtain air cooler fan and pump control circuit should be centralized, control switch should be installed indoors.
6, when the winter without chillers, pool water to put the net and put the box with plastic or cloth wrapped to avoid sand into the interior.